Read Sharp XG-MB67X (serv.man18) User Guide / Operation Manual online
56
Removing and Installing the
Lamp Unit
Lamp Unit
• Make sure that you remove the lamp unit by
the handle. Do not touch the glass surface of
the lamp unit or the inside of the projector.
the lamp unit or the inside of the projector.
• To avoid injury to yourself and damage to the
lamp, be sure to carefully follow the steps
below.
below.
• Do not loosen other screws except for the
lamp unit cover and lamp unit.
Press SSTANDBY/ON on the pro-
jector or eSTANDBY on the re-
mote control to put the projector
into standby mode.
jector or eSTANDBY on the re-
mote control to put the projector
into standby mode.
• Wait until the cooling fan stops.
Warning!
• Do not remove the lamp unit from the projec-
tor right after use. The lamp and parts around
the lamp will be very hot and may cause burns
or injury.
the lamp will be very hot and may cause burns
or injury.
Disconnect the power cord.
• Unplug the power cord from the AC
socket.
• Leave the lamp until it has fully cooled
down (about 1 hour).
Remove the lamp unit cover.
• Turn the projector over. Loosen the user
service screw (1) that secures the lamp
unit cover. Remove the lamp unit cover
(2).
unit cover. Remove the lamp unit cover
(2).
1
2
Lamp unit
AN-XR20LP
AN-XR20LP
Info
Optional
accessory
AC socket
User service screw
(for lamp unit cover)
(for lamp unit cover)
1
2
3
STANDBY/ON button
Regarding the Lamp (Continued)
XG-MB67X_EN2_CD_l
06.5.24, 1:53 PM
56
Click on the first or last page to see other XG-MB67X (serv.man18) service manuals if exist.