XG-C68X. Version 1.1 - Sharp Projector Handy Guide. Page 19

19

• 

Place a translucent screen between the projector and the audience.

• 

Reverse the image by setting “Rear” in “PRJ Mode”.

• 

Place a mirror (normal flat type) in front of the lens.

When using a mirror, be sure to carefully position both the projector and the mirror so the light does not
shine into the eyes of the audience.

• 

It is recommended that you use the optional Sharp ceiling-mount bracket for this
installation. Before mounting the projector, contact your nearest Sharp Authorised
Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket
(sold separately.) (ANXGCM55 ceiling-mount bracket, its AN-EP101B extension tube and
AN-JT200 universal bracket, adapter for non-level ceiling installation (for U.S.A.), BB-
M20T ceiling adapter, its BBNVHOLDER280, BB-NVHOLDER550, BB-NVHOLDER900
ceiling mount systems (for GERMANY), or AN-60KT ceiling mount bracket, its AN-TK201
and AN-TK202 extension tubes (for countries other than the U.S.A. and GERMANY))

• 

Be sure to adjust the position of the projector to match the distance (H) from the lens
centre position to the lower edge of the image, when mounting the projector on the
ceiling.

• 

Invert the image by setting “Ceiling + Front” in “PRJ Mode”.