Read Sharp XG-C68X Handy Guide online
Lamp Replacement Procedure
Version 1.1
Issue 04/2006
Issue 04/2006
12
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
4.
Remove the lamp unit cover.
•
Loosen the user service screw that secures the lamp
unit cover. Then open the cover in the direction of the
arrow.
unit cover. Then open the cover in the direction of the
arrow.
5.
Remove the lamp unit.
•
Loosen the securing screws from the lamp
unit. Hold the lamp unit by the handle and
pull it in the direction of the arrow.
unit. Hold the lamp unit by the handle and
pull it in the direction of the arrow.
6.
Insert the new lamp unit.
•
Press the lamp unit firmly into the lamp unit
compartment. Fasten the securing screws.
compartment. Fasten the securing screws.
7.
Attach the lamp unit cover.
•
Insert the tab of the lamp unit cover into the opening,
and press the cover until it clicks in place.
and press the cover until it clicks in place.
Note
•
If the lamp unit and lamp cover are not correctly
installed, the power will not turn on, even if the power
cord is connected to the projector.
installed, the power will not turn on, even if the power
cord is connected to the projector.
Click on the first or last page to see other XG-C68X service manuals if exist.