Read Sharp XG-C68X (serv.man5) User Guide / Operation Manual online
12
After inserting the upper half of the lens
cover tabs into the projector tab holes, slide
the lens cover towards the projector until it
clicks into place.
• If the upper half of the lens cover is not se-
cover tabs into the projector tab holes, slide
the lens cover towards the projector until it
clicks into place.
• If the upper half of the lens cover is not se-
cured to the projector, you will not be able to
turn the power on.
turn the power on.
9
Make sure that the two grooves on the lens
fastener ring are facing upward.
fastener ring are facing upward.
10
Ensure that the two grooves on the lens
mount face upward and the pin of lens in-
sertion area is inserted into the hole of the
lens mount as you push the lens into the
projector.
• Make sure the lens is pushed into the projec-
mount face upward and the pin of lens in-
sertion area is inserted into the hole of the
lens mount as you push the lens into the
projector.
• Make sure the lens is pushed into the projec-
tor interior firmly.
11
Turn the lens fastener catch tab in the direc-
tion of the arrows in the illustration until it
stops.
• Be careful not to turn the lens fastener ring
tion of the arrows in the illustration until it
stops.
• Be careful not to turn the lens fastener ring
too tight, as the lens fastener ring will be stiff
the next time the lens is changed.
the next time the lens is changed.
6
First insert tabs a
a
a
a
a of the lens cover into tab
holes A
A
A
A
A of the projector, then push tabs b
b
b
b
b
into tab holes B
B
B
B
B until it clicks into place.
7
Push in the carrying handle.
7
6
Tab holes B
Tab holes A
Tabs a
Tabs b
8
Remove the cap from the back of the lens.
-2
8
9
10
Lens fastener
ring
Pin
Hole
Grooves
Lens
mount
11
12
Tabs
Tab holes
Click on the first or last page to see other XG-C68X (serv.man5) service manuals if exist.