XG-C60X (serv.man8). Complete service manual - Sharp Projector Service Manual (repair manual)

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.

Im lnteresse der Benutzersicherheit (erforderliche Sicherheitsregeln in einigen Ländern) muß das Gerät in seinen
Originalzustand  gebracht werden.  Außerdem dürfen für die spezifizierten Bauteile nur identische Teile verwendet
werden.

» CHANGING PARTS LIST .................................. 2
» SPECIFICATIONS ............................................. 3
» SOFTWARE UPDATE PROCEDURE ............... 4
» SCHEMATIC DIAGRAM .................................... 8
» PRINTED WIRING BOARD ASSEMBLIES ..... 10
» PARTS LIST

Ë ELECTRICAL PARTS ...................................11
Ë CABINET AND MECHANICAL PARTS ....... 12
Ë ACCESSORIES PARTS .............................. 17
Ë PACKING PARTS ........................................ 17

» PACKING OF THE SET ................................... 18

Page

Seite

» ÄNDERN DER TEILELISTE .............................. 5
» TECHNISCHE DATEN ...................................... 6
» SOFTWARE-AKTUALISIERUNGS-

VERFAHREN ..................................................... 7

» SCHEMATISCHER SCHALTPLAN ................... 8
» LEITERPLATTENEINHEITEN ......................... 10
» ERSATZTEILLISTE

Ë ELEKTRISCHE BAUTEILE ..........................11
Ë GEHÄUSE UND MECHANISCHE

BAUTEILE ................................................... 12

Ë ZUBEHÖRTEILE ......................................... 17
Ë VERPACKUNGSTEILE ............................... 17

» VERPACKEN DES GERÄTS ........................... 18

This service manual covers only changes from XG-C55X. For other information, refer to the service manual of XG-
C55X.

Diese Service-Anleitung umfasst nur Änderungen zum XG-C55X. Weitere Informationen finden Sie in der Service-
Anleitung für den XG-C55X.

S93i5XG-C60XU

Ref.No.

Desccription

XG-C55X

XG-C60X

Note

PRINTED WIRING BOARD ASSEMBLY

Input Unit

DUNTKB170DE04

DUNTKB170DE05

The daughter parts are same as XG-C55X.

Output Unit

DUNTKB929FE01

DUNTKB929FE02

The daughter parts are same as XG-C55X.

Key Unit

DUNTKB602DE01

DUNTKB602DE02

The daughter parts are same as XG-C55X.

R/C Unit

DUNTKB603DE01

DUNTKB603DE02

The daughter parts are same as XG-C55X.

AC Inlet Unit

RUNTKA058WJZZ

←

Fan Unit

RUNTKA026WJN1

RUNTKA026WJN2

Power Unit

RDENCA044WJZZ

←

PC I/F Unit

CPCi-A002CE30

CPCi-A002CE31

The daughter parts are same as XG-C55X.

Ballast Unit

RDENCA045WJZZ

←

Fan Unit

R7219

Resistor

VRS-CY1JF273FY

VRS-CY1JF103FY

R7220

Resistor

VRS-CY1JF103FY

VRS-CY1JF273FY

Cabinet and Mechanical Parts

Refer to Parts List

Optics Mechanism Parts

Refer to Parts List

LCD Projector
XG-C60X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I
LCD panel 

× 3, RGB optical shutter method

Panel size: 0.99" (25.1 mm) (15 [H] 

× 20 [W] mm)

No. of dots: 786,432 dots (1,024 [H] 

× 768 [V])

1—1.27

× zoom lens, F1.7—2.2, f = 36.5—46.3 mm

SHP 300 W
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 

Ω terminated

P

B

: 0.7 Vp-p, 75 

Ω terminated

P

R

: 0.7 Vp-p, 75 

Ω terminated

750 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0—0.7 Vp-p, positive, 75 

Ω terminated

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω

terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω terminated

9-pin mini DIN connector
12—230 MHz
43—200 Hz*
15—126 kHz
ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 k

Ω (stereo)

3.0 W (monaural)
4 cm 

× 7 cm

AC 100–240 V
4.0 A
50/60 Hz
400 W (Standard mode)/325 W (Low power mode) with AC 100 V
380 W (Standard mode)/310 W (Low power mode) with AC 240 V
0.5 W (AC 100 V) – 0.8 W (AC 240 V) (When “Mntr.out/RS232” is set to “OFF”)
1,505 BTU/hour (Standard mode)/1,220 BTU/hour (Low power mode) with AC 100 V
1,430 BTU/hour (Standard mode)/1,165 BTU/hour (Low power mode) with AC 240 V
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
15

3

⁄

8

"

× 3 

7

⁄

8

"

× 11 

9

⁄

16

" (390 (W) 

× 99 (H) × 294 (D) mm) (main body only)

15

1

⁄

2

"

× 4 

7

⁄

16

"

× 11 

5

⁄

8

" (393 (W) 

× 114 (H) × 303 (D) mm) (including adjustment foot

and projecting parts)
11.3 lbs. (5.1 kg)

Product type

Model

Video system

Display method

LCD panel

Standard lens

Projection lamp

Component input signal

(INPUT1/2)

Horizontal resolution

Computer RGB input signal

(INPUT 1/2)

Video input signal

(INPUT 3)

S-video input signal

(INPUT 4)

Computer control signal (RS-232C)

Pixel clock

Vertical frequency

Horizontal frequency

Audio input signal

Audio output

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.

As a part of policy of continuous improvement, SHARP reserves the right to make design and speci-
fication changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in
individual units.

Remote control, Two R-6 batteries, Power cord for U.S., Canada etc. (11'10", 3.6 m), Power cord 
for Europe except U.K. and Korea (6', 1.8 m), Power cord for U.K., Hong Kong and Singapore  (6', 
1.8 m), Power cord for Australia, New Zealand and Oceania (6', 1.8 m), RGB cable (9'10", 3 m), 
USB cable (3'3", 1 m), DIN-D-sub RS-232C adaptor (5 57⁄64", 15 cm), Remote receiver, Extra air 
filter, Lens cap (attached), Projector manual and technical reference CD-ROM, Sharp Advanced 
Presentation Soft-ware CD-ROM, Sharp Advanced Presentation Software quick installation guide, 
Quick guide label,Operation manual

Lamp unit (Lamp/cage module) (BQC-XGC55X//1), Remote control (RRMCGA176WJSA), Two R-
6batteries (“AA” size, UM/SUM-3, HP-7, or similar), Power cord for U.S., Canada 
etc.(QACCDA010WJPZ), Power cord for Europe except U.K. and Korea (QACCVA011WJPZ), 
Power cord for U.K., Hong Kong and Singapore, (QACCBA012WJPZ), Power cord for Australia, 
New Zealand and Oceania (QACCLA018WJPZ), RGB cable (QCNWGA012WJPZ), USB cable 
(QCNWG0007CEPZ), DIN-D-sub RS-232C adaptor (QCNWGA015WJPZ), Remote receiver 
(RUNTKA061WJZZ), Air filter(PFILDA005WJZZ), Lens cap (PCAPHA003WJSA), Projector manual 
and technical reference CD-ROM (UDSKAA042WJZZ), Sharp Advanced Presentation Software 
CD-ROM (UDSKAA043WJZZ),Sharp Advanced Presentation Software quick installation guide 
(TINS-A867WJZZ), Quick guide label (TLABZA364WJZZ), Operation manual (TiNS-B043WJZZ)

12. On the Tera Term Pro, select the File and then the Send file.

Check the Binary in the Option and then select the software file for update you decompressed.

Then click open.