Read Sharp PG-MB60X Handy Guide online
Lamp Replacement Procedure
Version 1.2
Issue 04/2006
Issue 04/2006
11
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Removing and Installing the Lamp Unit
Note
•
Ensure the lamp unit is
removed using the handle.
Ensure the glass surface
of the lamp unit or the
insides of the projector are
not touched.
removed using the handle.
Ensure the glass surface
of the lamp unit or the
insides of the projector are
not touched.
•
To avoid injury to yourself
and damage to the lamp,
ensure to carefully follow
the steps below.
and damage to the lamp,
ensure to carefully follow
the steps below.
•
Do not loosen other screws except for the lamp unit cover and lamp unit. (Only the silver
screws are loosened).
screws are loosened).
1.
Press “STANDBY” on the projector to turn off the power.
•
Wait until the cooling fan stops.
Warning!
•
Do not remove the lamp unit from the projector right after use.
The lamp will be very hot and may cause burn or injury.
The lamp will be very hot and may cause burn or injury.
2.
Disconnect the power cord.
•
Unplug the power cord from the AC socket.
•
Leave the lamp until it has fully cooled down (about 1 hour).
Click on the first or last page to see other PG-MB60X service manuals if exist.