Read Sharp PG-M25XE (serv.man31) User Guide / Operation Manual online
Easy to Use Functions
-93
Setting the Video Signal
Setting the Video
Signal
Signal
Select “Video System” in the “Options
(1)” menu on the menu screen.
(1)” menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55
.
Note
• The video signal can only be set in IN-
PUT 2 or INPUT 3 mode.
• In “Auto”, images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
received.
When connected to PAL video equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video equipment.
PAL
SECAM
SECAM
NTSC4.43
NTSC3.58
The video input system mode is preset to “Auto”; however, a clear picture from the con-
nected audio-visual equipment may not be received, depending on the video signal differ-
ence. In that case, switch the video signal.
nected audio-visual equipment may not be received, depending on the video signal differ-
ence. In that case, switch the video signal.
Click on the first or last page to see other PG-M25XE (serv.man31) service manuals if exist.