Read Sharp PG-M25XE (serv.man30) User Guide / Operation Manual online
Basic Operation
Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings.
Selected Item
Description
button
button
Contrast
Bright
Color
Tint
Sharp
Red
Blue
CLR Temp
For adjusting the contrast level
For adjusting the brightness of an image
For adjusting the color intensity of the image
For adjusting the tones of an image
For making sharper or softer the contour of an image
For adjusting the redness level
For adjusting the blue level
For adjusting the color temperature of an image
For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue
Decreases color
temperature for warmer,
reddish, incandescent-
like images.
temperature for warmer,
reddish, incandescent-
like images.
For more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
Increases color
temperature for cooler,
bluish, fluorescent-like
images.
temperature for cooler,
bluish, fluorescent-like
images.
Adjusting Image
Preferences
Preferences
Adjust the Picture menu on the menu
screen.
screen.
➝ For operating the menu screen, see
pages 50 to 55
.
Note
• “Color”, “Tint” and “Sharp” are not dis-
played when selecting INPUT 1 and the
“Signal Type” is “RGB” .
“Signal Type” is “RGB” .
• The picture adjustments can be stored
separately in each input mode.
• When the signal type in INPUT 1 has
been set to Component, “Sharp” can be
adjusted when 480I, 480P, 720P or 1080I
signals are entered.
adjusted when 480I, 480P, 720P or 1080I
signals are entered.
• When “sRGB” in the “Options (1)” menu
has been set to “ON”, “Red”, “Bleu”, and
“CLR Temp” cannot be adjusted.
“CLR Temp” cannot be adjusted.
• To reset all adjustment items, select “Re-
set” and press
.
Selecting the Signal Type
This function allows you to select the input
signal type RGB or Component for INPUT1.
signal type RGB or Component for INPUT1.
Select “Signal Type” in the “Picture”
menu on the menu screen.
menu on the menu screen.
➝ For operating the menu screen, see
pages 50 to 55
.
•
RGB
Set when RGB signals are received.
•
Component
Set when Component signals are received.
-59
Click on the first or last page to see other PG-M25XE (serv.man30) service manuals if exist.