Read Sharp PG-M25XE (serv.man30) User Guide / Operation Manual online
Basic Operation
-43
TEACH button
LED
indicator
indicator
Registered
TEACH button
ENTER button
3
Press
on the GyroRemote
you want to register.
• The LED indicator on the GyroRemote
blinks.
• “Registered” is displayed at the bottom
of the screen for a few seconds and
registration starts.
When storing is complete, “Learn
Mode” is displayed.
registration starts.
When storing is complete, “Learn
Mode” is displayed.
Note
• If no action is taken for more than 5
minutes, the projector exits from the
Learn mode.
Learn mode.
4
Press
• This completes the Registration mode.
Registering Multiple
GyroRemotes in One
Projector
GyroRemotes in One
Projector
A maximum of 8 GyroRemotes can be registered.
1
Set the same channel for the
RF channel of the GyroRemote
you want to register.
RF channel of the GyroRemote
you want to register.
• For details on the setting, see
page 42
.
2
Using step 3 in “Registering
the GyroRemote in the Projec-
tor”, press
the GyroRemote in the Projec-
tor”, press
on the
GyroRemotes to be registered.
• When registering other GyroRemotes
continuously, after each GyroRemote
is registered and the Registration
mode message is displayed, proceed
with the next GyroRemote.
is registered and the Registration
mode message is displayed, proceed
with the next GyroRemote.
• After 8 GyroRemotes have been reg-
istered, the Registration mode will
automatically terminate.
automatically terminate.
3
Press
when the number of
registered GyroRemotes is
fewer than 8.
fewer than 8.
• This ends the Registration mode.
Note
• Contact your nearest Sharp Autho-
rized Projector Dealer or Service
Center if you need to use an addi-
tional GyroRemote unit.
Center if you need to use an addi-
tional GyroRemote unit.
Click on the first or last page to see other PG-M25XE (serv.man30) service manuals if exist.