PG-M20X (serv.man24). Setup connection - Sharp Projector User Guide / Operation Manual. Page 8

Read Sharp PG-M20X (serv.man24) User Guide / Operation Manual online

-22
1
DVI cable
(sold separately)
Connecting the Projector to Other Devices (cont.)
Connecting to a
Computer Using a DVI
Cable (Sold Separately)
This projector comes installed with a DVI digi-
tal input terminal in which computer digital im-
age signals can be directly input.
1
Connect the projector to the
computer using the DVI cable.
2
To input audio signal, connect
the projector to the computer
using a ø3.5 mm stereo audio
cable (commercially available
or available as Sharp service
part QCNW-4870CEZZ).
Note
• This DVI port is DVI version 1.0 compat-
ible. Therefore when the signal is input
from copy guard system compatible (DVI
version 2.0) equipment, no signal will be
received.
“Plug and Play” function (when connecting to a 15-pin terminal)
■ This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer will communicate their setting requirements, allowing for quick and easy setup.
■ Before using the “Plug and Play” function, be sure to turn on the projector first and the connected
computer last.
Note
• The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA
DDC compatible computer.
Optional
accessory
DVI cable
Type: AN-C3DV
(9'10" (3.0 m))
To DVI Digital Output port
To Audio
Output port
2
ø3.5 mm stereo
audio cable
(commercially
available or available
as Sharp service part
QCNW-4870CEZZ)
Desktop computer
Page of 12
Display

Click on the first or last page to see other PG-M20X (serv.man24) service manuals if exist.