Read Sharp PG-M20S Handy Guide online
Lamp Replacement Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
13
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1.
Connect the power cord.
•
Plug the power cord into the AC socket of the
projector.
projector.
2.
Reset the lamp timer.
•
While pressing simultaneously “ADJ DOWN”, “VOL +”
and “ENTER” on the projector, press “POWER”.
and “ENTER” on the projector, press “POWER”.
•
“LAMP 0000H” is displayed, indicating that the lamp
timer is reset.
timer is reset.
Note
•
Make sure to reset the lamp timer only when
replacing the lamp. If you reset the lamp timer and
continue to use the same lamp, this may cause the
lamp to become damaged or explode.
replacing the lamp. If you reset the lamp timer and
continue to use the same lamp, this may cause the
lamp to become damaged or explode.
Click on the first or last page to see other PG-M20S service manuals if exist.