PG-M20S (serv.man3). Specifications - Sharp Projector Specification (repair manual)

Digital Multimedia Projector
PG-M20X/PG-M20S
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480

I

/DTV480P/DTV720P/DTV1080

I

Single Chip Digital Micromirror Device™ (DMD™) by Texas Instruments
Panel size: 0.7" (17.8 mm), 1 chip XGA DMD(PG-M20X)/0.55"(14.0mm)",1 chip SVGA DMD(PG-M20S)
No. of dots: 786,432 dots (1,024 [H] 

×

 768 [V])(PG-M20X)/480.000 dots (800[H] 

×

 600[V])(PG-M20S)

1–1.2

×

 zoom lens, F1.75–2.04, f = 28.0–33.5 mm

High Intensity Discharge Lamp (HID Lamp), DC 210 W
29-pin connector
DVI input signal: Digital 250–1,000 mV 50 

Ω

Analog 0.7 Vp-p 75 

Ω

Y: 1.0 Vp-p, sync negative, 75 

Ω

 terminated

P

B

: 0.7 Vp-p, 75 

Ω

 terminated

P

R

: 0.7 Vp-p, 75 

Ω

 terminated

700 TV lines (DTV720P)(PG-M20X)/500TV Lines (S-Video[NTSC3.58])(PG-M20S)
29-pin connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 

Ω

 terminated

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω

 terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω

 terminated

RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω

terminated
12–230 MHz(PG-20X)/12-120MHz(PG-M20S)
43–100 Hz
15–126 kHz(PG-20X)/15-102kHz(PG-M20S)
ø3.5 mm M

INIJACK

: AUDIO, 0.5 Vrms, more than 47 k

Ω

 (stereo)

2.0 W (monaural)
4 cm 

×

 3 cm

AC 100–240 V
3.2 A
50/60 Hz
290 W
<1,090 BTU/hour
41

°

F to 95

°

F (+5

°

C to +35

°

C)

–4

°

F to 140

°

F (–20

°

C to +60

°

C)

Plastic
38 kHz
8

5

⁄

8

"

×

 3" 

×

 11 

15

⁄

16

" (219 (W) 

×

 76 (H) 

×

 303 (D) mm) (main body only)

8

3

⁄

4

"

×

 3 

1

⁄

4

"

×

 12 

1

⁄

2

" (223 (W) 

×

 83 (H) 

×

 318 (D) mm) (including adjustment feet

and projecting parts)
5.8 lbs. (2.6 kg)
Remote control, Two R-03 batteries, Power cord for U.S., Canada etc. (6', 1.8 m), Power
cord for Europe, except U.K. (6', 1.8 m), Power cord for U.K., Hong Kong and Singapore (6',
1.8 m), Power cord for Australia, New Zealand and Oceania (6', 1.8 m), DVI to 15-pin D-sub
cable (6', 1.8 m), USB cable (6', 1.8 m), Carrying case, Lens cap (attached), Lens cap
strap, Terminal cover (attached), CD-ROM, Operation manual, Quick reference guides
Lamp unit (Lamp/cage module) (BQC-PGM20X//1), Remote control (RRMCGA013WJSA),
Two R-03 batteries (“AAA” size, UM/SUM-4, HP-16, or similar), Power cord for U.S., Canada
etc. (QACCDA007WJPZ), Power cord for Europe, except U.K. (QACCV4002CEZZ), Power
cord for U.K., Hong Kong and Singapore (QACCB5024CENA[PG-M20X]/QACCBA012WJPZ

Power cord for Australia,

[PG-M20S]), New 

Zealand and Oceania 

(QACCL3022CEZZ), 

DVI to 15-pin D-sub  cable (QCNWGA010WJZZ), USB  cable  (QCNWG0001WJPZ), 
Carrying case (GCASN0005CESA), Lens cap (CCAPHA001WJ01), Lens cap strap 

(UBNDT0013CEZZ),Terminal cover (GCOVD0103CESA), CD-ROM (UDSKA0058CEN1

 [PG-M20X]/UDSKAA009WJZZ[PG-M20S]),Operation manual (TINS-7609CEZZ[PG-M20X]
/TINS-A209WJZZ[PG-M20S]), Quick reference guides 

Product type

Model

Video system

Display method

DMD panel

Lens

Projection lamp

Component input signal

(INPUT1)

Horizontal resolution

Computer RGB input signal

(INPUT 1)

S-video input signal

(INPUT 2)

Video input signal

(INPUT 3)

Pixel clock

Vertical frequency

Horizontal frequency

Audio input signal

Audio output

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

This SHARP projector uses a DMD panel. This very sophis-
ticated panel contains 786,432(PG-M20X)/480,000(PG-M20- 

S) pixels.  As with any high tech nology electronic equipment 

such as large screen TVs, video systems and video cameras, 
there are certain acceptable tolerances that the equipment

must conform to.

This unit has some inactive pixels within acceptable toler-
ances which may result in inactive dots on the picture screen.
This will not affect the picture quality or the life expectancy
of the unit.

Specifications are subject to change without notice.