PG-M10SE (serv.man7). Replacing the lamp - Sharp Projector Service Manual (repair manual)

pg-m10se (serv.man7) service manual
Model
PG-M10SE (serv.man7)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
109.85 KB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Replacing the lamp
File
pg-m10se-sm7.pdf
Date

Read Sharp PG-M10SE (serv.man7) Service Manual online

15
PG-M10SU/SE
PG-M10XU/XE
REPLACING THE LAMP
● 
Tools required
1. A soft sheet on which the projector is placed upside down.  It is to protect the unit against scratches.
2. Phillips screwdriver No. 1
● 
Precautions in replacing and handling the lamp
1. Be sure to unplug the power cable before starting the procedure.  (For prevention of electric shock)
2. Make sure that the lamp has cooled down before replacement.  (For prevention of burns)
3. Do not give intense shock or vibration to the lamp.  (For prevention of breakage and injury)
4. Do not disassemble the lamp.
● 
Replacement procedure
1) Remove the screw off the lamp cover.
Select the lamp time menu, and keep pressing the
POWER ON button of the remote controller for 10
seconds or longer.
3) Remove the three screws off the lamp unit.
5) Install a new lamp unit into position.
2) Detach the lamp cover.
6) Tighten up the three screws in the lamp unit.
7) Mount the lamp cover and fix it with the screw.
4) Take out the lamp unit by holding its grip.
8) Reset the total lamp timer.
Display

Download Sharp PG-M10SE (serv.man7) Service Manual (Repair Manual)

Here you can read online and download Sharp PG-M10SE (serv.man7) Service Manual in PDF. PG-M10SE (serv.man7) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp PG-M10SE (serv.man7) Projector. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.