Read Sharp PG-C45X Handy Guide online
Maintenance Procedure
Version 1.5
Issue 04/2006
Issue 04/2006
15
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Replacing the Air Filter
•
This projector is equipped with air filters to ensure the optimal
operating condition of the projector.
operating condition of the projector.
•
The air filters should be cleaned every 100 hours of use. Clean
the filters more often when the projector is used in a dusty or
smoky location.
the filters more often when the projector is used in a dusty or
smoky location.
•
Ask your nearest Sharp Authorised Projector Dealer or Service
Centre to exchange the filter (PFILDA005WJZZ) when it is no
longer possible to clean.
Centre to exchange the filter (PFILDA005WJZZ) when it is no
longer possible to clean.
1.
Turn off the power and disconnect the
power cord.
power cord.
•
Press “OFF”. Wait until the cooling fan stops.
2.
Remove the bottom filter cover.
•
Turn over the projector. Grab the tab and slide open the
filter cover in the direction of the arrow.
filter cover in the direction of the arrow.
3.
Remove the air filter.
•
Pick the air filter up with your fingers and lift it out of the
filter cover.
filter cover.
Click on the first or last page to see other PG-C45X service manuals if exist.