PG-C45X (serv.man39). Software upgade - Sharp Projector Technical Bulletin (repair manual). Page 3

LV-085

Sharp Electronics (UK) Ltd., Technical Services Group

3-2. On the Tera Term Pro, select the “Setup” and then the “Terminal”.

Change “Receive” to “CR+LF” and then click “Local echo” to check.
Then click “OK”.

3-3. Make sure that the “ERR” is returned from the projector when you pressed the ENTER key.

4. Call the process mode. Press the operation keys in order of:

POWER ON -> ADJ UP -> ADJ DN -> ADJ UP -> ADJ DOWN -> ENTER -> ENTER -> MENU

5. Select the “SPECIAL” on the process menu and then press the ENTER key.
6. Select the “IPL2” on the sub menu and then press the ENTER key.
The lamp will turn off and the projector goes into the software write mode.
7. Once unplug the AC cord and then plug it in again.

Note: Be sure to unplug the AC cord once and plug it in again.

8. On the Tera Term Pro, enter the “RATE1152” and then press the ENTER key.