PG-C45X (serv.man38). Sound is output for a moment at maximum volume level when the projector is turned ON - Sharp Projector Technical Bulletin (repair manual). Page 5

Read Sharp PG-C45X (serv.man38) Technical Bulletin online

LV-097
Sharp Electronics (UK) Ltd., Technical Services Group
13. The transfer of data will begin if the settings is correct.
The Bytes transferred will be counted in the dialog box.
14. Wait for several minutes until the OK is displayed two times and then the lamp indicator will be illuminated in
red. If ERR is displayed, take the steps again from step 1.
Caution:
Never turn off the projector or unplug the AC cord while transferring the data. If it is done,
the projector becomes unable to turn the power on.
In case of this, recover the projector by taking the following steps.
(1) Remove the top and the back side cabinet of the projector.
(2) Set the switch on the PC board to the WRITE side.
(3) Plug the AC cord.
(4) Take the steps again from the step 8.
(5) After transferring the data, set the switch on the PC board to the NORMAL side.
15. Unplug the AC cord.
16. Then plug the AC cord again and call the process mode.
17. Entering the process menu, make sure the software is changed to 040528.
18. Turn off the projector.
Update is complete.
Page of 5
Display

Download Sharp PG-C45X (serv.man38) Technical Bulletin