Read Sharp PG-C45X (serv.man30) User Guide / Operation Manual online
Easy to Use Functions
-57
Displaying Dual Pictures (
Pict in Pict
)
Picture in Picture function allows you to display two pictures on the same screen. You can
display the image input from INPUT 3 or 4 as an inset picture overlapping the main picture
from INPUT 1 or 2.
display the image input from INPUT 3 or 4 as an inset picture overlapping the main picture
from INPUT 1 or 2.
Displaying the Inset Picture
1
Press
.
2
Press
or
on the remote
control or
on the projector
to switch the image in the in-
set picture .
set picture .
3
Press '
'
'
'
', "
"
"
"
", \
\
\
\
\ and |
|
|
|
| to set the
position of the inset picture.
• Press
to stop the frame from mov-
ing or to make the frame disappear.
4
Press
to move the inset pic-
ture.
• The inset picture will be moved to the
inset picture frame.
Note
• The inset picture can only be displayed
with composite video (NTSC/PAL/
SECAM) or S-Video signal.
SECAM) or S-Video signal.
• The Freeze function works only with the
inset picture, when the Pict in Pict mode
is in operation.
is in operation.
When the signal entered into INPUT 1 or 2
is as follows, Pict in Pict does not work:
is as follows, Pict in Pict does not work:
• With a resolution that exceeds SXGA.
• When the input signal is 480
I
, 480P,
540P, 580
I,
580P, 720P, 1035
I
or 1080
I
.
• When the input signal has changed to
the Interlace mode using RGB signals.
• When the picture display mode is set to
“DOT BY DOT”.
• When no signals are sent to INPUT 1 or
2, or when the resolution or refresh rate
(vertical frequency) is changed.
(vertical frequency) is changed.
'
,
"
,
\
,
|
buttons
PinP button
INPUT 3/4 buttons
UNDO button
ENTER button
PG-C45X#E_PDF#p51_59.p65
03.2.17, 11:39 AM
57
Click on the first or last page to see other PG-C45X (serv.man30) service manuals if exist.