PG-C30XE. Version 1.4 - Sharp Projector Handy Guide. Page 38

38

No.

Adjustment Items

Adjustment Conditions

Adjustment Procedures

17

Video AGC

1. Feed the split colour bar signal.
Group : VIDEO 1
Subject : AGC

Using the control switches or the remote
controller buttons, adjust the setting until the
white signal becomes bit-less.

18

Tint

1. Feed the split colour bar signal.
Group : VIDEO 1
Subject : TINT
2. Connect the oscilloscope to pin (4)
of P801.

Using the control switches or the remote
controller buttons, adjust the data to have
the -(B-Y) waveform downhill straight.

After adjusting, adjust the value of TINT up 3
point.

19

NTSC colour saturation
level

1. Feed the split colour bar signal.
Group : VIDEO 1
Subject : N-COLOR
2. Connect the oscilloscope to pin (1)
of P801.

Using the control switches or the remote
controller buttons, adjust the difference
between the 100% white portion and the red
portion to 0.00 ±0.05 Vp-p. (same as 100%
white)

20

PAL colour saturation level

1. Feed the split colour bar signal.
Group : VIDEO 1
Subject : P-COLOR
2. Connect the oscilloscope to pin (1)
of P801.

Using the control switches or the remote
controller buttons, adjust the difference
between the 100% white portion and the red
portion to 0.00 ±0.05 Vp-p. (same as 100%
white)

21

SECAM colour saturation
level

1. Feed the split colour bar signal.
Group : VIDEO 1
Subject : S-COLOR
2. Connect the oscilloscope to pin (1)
of P801.

Using the control switches or the remote
controller buttons, adjust the difference
between the 100% white portion and the red
portion to 0.00 ±0.05 Vp-p. (same as 100%
white)