PG-C30XE (serv.man4). Contents, Removing of major parts, Resetting the total lamp timer, The optical unit outline, Covergence and focus adjustment, Electrical adjustment, Adjusting hte PC interface, and Troubleshooting table - Page 1-43 - Sharp Projector Service Manual (repair manual). Page 11

Read Sharp PG-C30XE (serv.man4) Service Manual online

11
PG-C30XE
SHARP
Press both sides of the bottom
cabinet in the directions of 
arrow to undo the hooks. Lift 
and detach the top cabinet.
Hook
2-1
2-2
2-3
(KY)
Top cabinet
Rear cabinet
2-4
2. Removing the top and rear cabinets
2-1. Remove the four rear cabinet lock screws.
2-2. Remove the four terminal board lock screws off the rear cabinet. Unhook and detach the rear cabinet from
below.
2-3. Remove the four top cabinet lock screws from below.
2-4. Slowly lift the top cabinet and disconnect the operation key unit connector (KY). Then take away the top
cabinet.
Page of 43
Display

Click on the first or last page to see other PG-C30XE (serv.man4) service manuals if exist.

Random: