Read Sharp PG-B10S Handy Guide online
Replacing the Prism Holder Unit
Version 1.4
Issue 04/2006
Issue 04/2006
41
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Replacing the prism holder unit
1. Remove the two lock screws from the prism holder, and detach the prism holder out of the
optical unit.
2. Fit a new prism holder in the optical unit.
optical unit.
2. Fit a new prism holder in the optical unit.
Note: Even if only the LCD is defective, replace the entire prism holder with new one. Do not
change the LCD alone for new one.
change the LCD alone for new one.
Click on the first or last page to see other PG-B10S service manuals if exist.