Read Sharp PG-B10S Handy Guide online
Lamp Replacement Procedure
Version 1.5
Issue 04/2006
Issue 04/2006
13
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1.
Connect the power cord.
•
Plug the power cord into the AC socket of
the projector.
the projector.
2.
Reset the lamp timer.
•
While pressing simultaneously “VOLUME +”
and “AUTO SYNC” on the projector, press
“ON” and “VOLUME –“on the projector.
and “AUTO SYNC” on the projector, press
“ON” and “VOLUME –“on the projector.
•
“LAMP 0000H” is displayed, indicating that
the lamp timer is reset.
the lamp timer is reset.
Note
•
Make sure to reset the lamp timer only when
replacing the lamp. If you reset the lamp
timer and continue to use the same lamp,
this may cause the lamp to become
damaged or explode.
replacing the lamp. If you reset the lamp
timer and continue to use the same lamp,
this may cause the lamp to become
damaged or explode.
Click on the first or last page to see other PG-B10S service manuals if exist.