Read Sharp PG-A20X Handy Guide online
Electrical Adjustments
Version 1.5
Issue 04/2006
Issue 04/2006
34
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
No.
Adjustment Items
Adjustment Conditions
Adjustment Procedures
15
Video sharpness
adjustment
adjustment
1. SGroup: VIDEO
Subject: Sharpness
Subject: Sharpness
1. Check the preset value.
Sharpness: 3
Sharpness: 3
16
DTV Tint adjustment
1. Select the following group and
subject.
Group : DTV
Subject : Tint
subject.
Group : DTV
Subject : Tint
1. Check the fixed value.
Tint : 5
Tint : 5
17
DTV Colour saturation
adjustment
adjustment
1. Select the following group and
subject.
Group : DTV
Subject : Colour
subject.
Group : DTV
Subject : Colour
1. Check the fixed value.
Colour : 8
Colour : 8
18
DVD Tint adjustment
1. Select the following group and
subject.
Group : DVD
Subject : Tint
subject.
Group : DVD
Subject : Tint
1. Check the fixed value.
Tint : 5
Tint : 5
19
DVD Colour saturation
adjustment
adjustment
1. Select the following group and
subject.
Group : DVD
Subject : Colour
subject.
Group : DVD
Subject : Colour
1. Check the fixed value.
Colour : 5
Colour : 5
20
Sample hold pulse phase
checking
checking
1. Feed the XGA 75-Hz black signal.
2. Select the following group and
subjects.
Group : OUTPUT3
Subject : GCK-PHASE
2. Select the following group and
subjects.
Group : OUTPUT3
Subject : GCK-PHASE
1. Check the fixed value.
Fixed Value : 8
Fixed Value : 8
21
RGB tone reproduction
adjustment
adjustment
1. Feed the SMPTE pattern signal.
1. Make sure the 100% and 95% white as
well as the 0% and 5% black gradations are
visible.
well as the 0% and 5% black gradations are
visible.
22
Automatic keystone
initialisation
initialisation
Group : LINE
Subject : Calibration
Subject : Calibration
Select Calibration in the process mode.
Place the set on a level surface. Press the
ENTER key on the remote controller. The
calibration setting becomes 1 first, and then
both the calibration and K-sensor settings
become 0.
Make sure that the K-sensor setting alone
will change to 0-3 or 129-131.
Place the set on a level surface. Press the
ENTER key on the remote controller. The
calibration setting becomes 1 first, and then
both the calibration and K-sensor settings
become 0.
Make sure that the K-sensor setting alone
will change to 0-3 or 129-131.
23
Off-timer performance
1. Select OFF from the process mode.
Make sure the off-timer starts with 5 minutes
on-screen and count one minute in one
second.
And then indication is 0 minute, the power
supply of the set is cut off.
Make sure the off-timer starts with 5 minutes
on-screen and count one minute in one
second.
And then indication is 0 minute, the power
supply of the set is cut off.
24
Thermistor performance
checking
checking
1. Heat the thermistor with a hair
dryer.
dryer.
1.Make sure that the temperature is
indicated.
indicated.
25
Auto sync performance
checking
checking
1. Feed the phase check pattern
signal.
signal.
1.In the VGA, SVGA and XGA modes, make
sure the Clock, Phase, H-Pos and V-Pos
settings can be automatically adjusted.
sure the Clock, Phase, H-Pos and V-Pos
settings can be automatically adjusted.
26
Delivery settings
1.Make the following settings.
Click on the first or last page to see other PG-A20X service manuals if exist.