PG-A10XA. Specifications - Sharp Projector Specification (repair manual)

LCD Projector
PG-A10X-A
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480 /DTV480P/DTV540P/DTV580 /DTV580P/DTV720P/DTV1035 /DTV1080
LCD panel   3, RGB optical shutter method
Panel size: 0.79" (20.0 mm) (12 [H]   16 [W] mm)
No. of dots: 786,432 dots (1,024 [H]   768 [V])
1–1.2  zoom lens, F1.9–2.2, f = 26–31 mm
SHP 165 W lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75   terminated
P

B

: 0.7 Vp-p, 75   terminated

P

R

: 0.7 Vp-p, 75   terminated

700 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75   terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75   terminated
C (chrominance signal): Burst 0.286 Vp-p, 75   terminated
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 
terminated
9-pin mini DIN connector
12–108 MHz
43–85 Hz
15–70 kHz
ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 k  (stereo)
1.0 W (monaural)
2.8 cm round   1
AC 100–240 V
2.4 A
50/60 Hz
240 W (Standard mode)/190 W (Eco mode) with AC 100 V
226 W (Standard mode)/182 W (Eco mode) with AC 240 V
3.6 W (AC 110 V) – 5.6 W (AC 240 V)
900 BTU/hour (Standard mode)/710 BTU/hour (Eco mode) with AC 100 V
850 BTU/hour (Standard mode)/680 BTU/hour (Eco mode) with AC 240 V
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
11

45

/

64

"   3 

13

/

64

"   9 

1

/

32

" (297 (W)   81 (H)   229 (D) mm) (main body only)

11 

45

/

64

"   3 

33

/

64

"   9 

1

/

32

" (297 (W)   89 (H)   229 (D) mm) (including adjustment foot

and projecting parts)
6.4 lbs. (2.9 kg)
Remote control, Two R-6 batteries, Power cord for U.S., Canada, etc. (6', 1.8 m), Power
cord for Europe, except U.K. (6', 1.8 m), Power cord for U.K.  (6', 1.8m),  

RGB cable (9'10", 3.0 m), Storage case, Lens cap (attached), Extra air filter, 
Projector manual and technical reference CD-ROM, “QUICK GUIDE” label, 

AN-A10LP,  Remote  control  (RRMCGA187WJSA),
Two R-6 batteries (“AA” size, UM/SUM-3, HP-7, or similar), 
Power cord for Europe, except U.K. (QACCVA006WJPZ), Power cord for U.K., 

(QACCBA015WJPZ),  RGB cable (QCNWGA012WJPZ), Storage  case (GCASNA008WJSA), 

Lens cap (CCAPHA012WJ01), Air filter (PFILDA008WJZZ), Projector manual and technical 

reference CD-ROM (UDSKAA037WJZZ), “QUICK GUIDE” label (TLABZA797WJZZ), 

Operation manual (TINS-A850WJZZ)

Product type

Model

Video system

Display method

LCD panel

Standard lens

Projection lamp

Component input signal

(INPUT1)

Horizontal resolution

Computer RGB input signal

(INPUT 1)

S-video input signal

(INPUT 2)

Video input signal

(INPUT 3)

Computer control signal (RS-232C)

Pixel clock

Vertical frequency

Horizontal frequency

Audio input signal

Audio output

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

As a part of policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.

Operation manual, DIN-D-Sub RS-232C Cable.  

×

×

×

×

×

×

×

×

×

Ω

Ω

Ω

Ω

Ω

Ω

Ω

Ω

×

×

×

×

I

I

I

I