Read Sharp PG-A10X Handy Guide online
Options
Version 1.5
Issue 04/2006
Issue 04/2006
19
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Projecting a Reversed/Inverted Image
Projection from behind the screen
•
Place a translucent screen between the projector and the audience.
•
Reverse the image by setting “Rear” in “PRJ Mode”.
Projection using a mirror
•
Place a mirror (normal flat type) in front of the lens.
Note
When using a mirror, be sure to carefully position both the projector and the mirror so the light does not
shine into the eyes of the audience.
shine into the eyes of the audience.
Ceiling-mount set-up
•
It is recommended that you use the optional Sharp ceiling mount bracket for this
installation. Before mounting the projector, contact your nearest Sharp Authorised
Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket
(sold separately.) AN-PGCM95 ceiling-mount bracket, its AN-EP101B extension tube and
AN-JT299 universal bracket, adapter for non-level ceiling installation (for U.S.A.). BB-
A10T ceiling adapter, its BB-NVHOLDER280, BBNVHOLDER550, BB-NVHOLDER900
ceiling mount systems (for GERMANY). AN-A10T ceiling-mount bracket, its AN-TK201
and ANTK202 extension tubes (for countries other than the U.S.A. and GERMANY).
installation. Before mounting the projector, contact your nearest Sharp Authorised
Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket
(sold separately.) AN-PGCM95 ceiling-mount bracket, its AN-EP101B extension tube and
AN-JT299 universal bracket, adapter for non-level ceiling installation (for U.S.A.). BB-
A10T ceiling adapter, its BB-NVHOLDER280, BBNVHOLDER550, BB-NVHOLDER900
ceiling mount systems (for GERMANY). AN-A10T ceiling-mount bracket, its AN-TK201
and ANTK202 extension tubes (for countries other than the U.S.A. and GERMANY).
•
Be sure to adjust the position of the projector to match the distance (H) from the lens
centre position to the lower edge of the image, when mounting the projector on the
ceiling.
centre position to the lower edge of the image, when mounting the projector on the
ceiling.
•
Invert the image by setting “Ceiling + Front” in “PRJ Mode”.
Click on the first or last page to see other PG-A10X service manuals if exist.