Read Sharp PG-A10X (serv.man10) Service Manual online
26
No.
Adjusting point
Adjusting conditions
Adjusting procedure
PG-A10X
PG-A10X-SL
PG-A10X-SL
AN-A10T
23
RGB perform-
ance checking
ance checking
1. Feed the RGB signal.
1.Select L4 of the process mode. Operation check of
Picture, Bright,Red, Blue, Clock, Phase, H-POS and
V-POS.
V-POS.
20
White balance
checking
checking
1. Use the adjustment condi-
tions in the item 9 for RGB
input and item 10 for sRGB
input.
input and item 10 for sRGB
input.
Check that there is no deviation of white balance with
the monitor.
the monitor.
21
Color-related
performance
checking
performance
checking
1. Feed the color bar signal.
1.Select L1 of the process mode. Operation check of
Color and Tint.
22
Video-related
performance
checking
performance
checking
1. Feed the monoscope pat-
tern signal.
1.Select L2 of the process mode. Operation check of
Picture, Bright and Sharpness.
15
DTV Color
saturation
adjustment
saturation
adjustment
1. Select the following group
and subject.
Group
Group
: DTV
Subject : Color
1. Check the fixed value.
Color : 13
16
DVD Tint adjust-
ment
ment
1. Select the following group
and subject.
Group
Group
: DVD
Subject : Tint
1. Check the fixed value.
Tint : 8
17
DVD Color
saturation
adjustment
saturation
adjustment
1. Select the following group
and subject.
Group
Group
: DVD
Subject : Color
1. Check the fixed value.
Color : 10
18
Sample hold
pulse phase
checking
pulse phase
checking
1. Check the fixed value.
Fixed Value : 8
1. Feed the XGA 75-Hz black
signal.
2. Select the following group
and subjects.
Group : OUTPUT3
Subject : GCK-PHASE
Group : OUTPUT3
Subject : GCK-PHASE
19
RGB tone
reproduction
adjustment
reproduction
adjustment
1. Make sure the 100% and 95% white as well as the
0% and 5% black gradations are visible.
1. Feed the SMPTE pattern
signal.
Click on the first or last page to see other PG-A10X (serv.man10) service manuals if exist.