PG-A10S (serv.man9). Electrical adjustments - Sharp Projector Service Manual (repair manual). Page 5

1. Select OFF from the process mode.

Make sure the off-timer starts with 5 minutes
onscreen and count one minute in one second.
And then indication is 0 minute, the power supply
of the set is cut off.

.

1. Heat the thermistor with a

hair dryer.

1.Make sure that the temperature is indicated.

1.Make the following settings.

Process adjustment

Remote control adjustment

S3

Factory setting at 3

1. Feed the phase check pat-

tern signal.

1.In the VGA, SVGA and XGA modes, make sure the

Clock, Phase, H-Pos and V-Pos settings can be au-
tomatically adjusted.