Read Sharp PAS (serv.man7) Service Manual online
Installing PAS add-ons
100
Printer Accounting Server: Administrator’s Guide
3.6.5 Specifying Queue Module local port settings
When you first install the SDR add-on, document queueing is not
enabled on the print server. It must be enabled on a per-port basis.
enabled on the print server. It must be enabled on a per-port basis.
•
Enable Queue Module
1. In the System Manager tree view, expand the
Print Server
node. Select a port node and expand it. Select
Queue Module
port configuration
.
2. In the right pane, select the
Enable queueing for this port
check box.
You can also set up Queue Module to evaluate print jobs so that
documents with specified characteristics are automatically released
or deleted from the print server. This is an advanced configuration
option, accomplished using print rule sets. See the section “Config-
uring Document Control” on page 281 for more information.
documents with specified characteristics are automatically released
or deleted from the print server. This is an advanced configuration
option, accomplished using print rule sets. See the section “Config-
uring Document Control” on page 281 for more information.
3.6.6 Configuring the SDR Viewer
SDR Viewer is bundled with the SDR add-on. This application is
identical to the Release Station except that you cannot use it to
release documents to the printer. The following section contains
more information about configuring Release Station.
identical to the Release Station except that you cannot use it to
release documents to the printer. The following section contains
more information about configuring Release Station.
3.6.7 Configuring the Release Station application
Depending on whether you install a self-serve (Logon) or a staff-
administered (Admin) release workstation, you may want to cus-
tomize the Release Station application so that its appearance and
operation optimally suit the needs of your network.
administered (Admin) release workstation, you may want to cus-
tomize the Release Station application so that its appearance and
operation optimally suit the needs of your network.
If you set up more than one release workstation, each Release Sta-
tion application must be configured individually.
tion application must be configured individually.
Click on the first or last page to see other PAS (serv.man7) service manuals if exist.