Read Sharp PAS (serv.man5) Service Manual online
PAS UNIX Print Server: Installation Guide
25
4.
Configuring PAS
Once the printers have been configured on the UNIX server,
you need to register them in PAS using the System Manager
application
you need to register them in PAS using the System Manager
application
A
Register the printers in System Manager
1. On the management workstation, start System Manager.
2. Add the UNIX print server as a server under your site
node using its DNS name. Refer to the PAS Administra-
tor’s Guide for System Manager configuration.
tor’s Guide for System Manager configuration.
3. In the System Manager tree view, expand your UNIX
server node.
4. Expand the Print Server node and select
Printers
.
All of the UNIX printers that you have created appear in
the right pane.
the right pane.
5. Select a printer from the list.
The
Status
column indicates that the printer is not regis-
tered.
6. At the bottom of the
Printers
list, click
Register
.
7. In the
Identification
group box of the
Register Printer
dia-
log, enter information to describe the selected printer.
8. If you are setting up more than one logical printer defi-
nition for a single physical device, in the
Printer proper-
ties
section, select the appropriate physical device from
the drop-down list.
To create a physical device definition, see the PAS
Administrator’s Guide.
Administrator’s Guide.
9. Optionally, in the following three text boxes, enter the
printer’s duty cycle, rated speed and recommended vol-
ume, as specified by the manufacturer. Your printer
specifications should provide this information.
ume, as specified by the manufacturer. Your printer
specifications should provide this information.
Click on the first or last page to see other PAS (serv.man5) service manuals if exist.