Read Sharp MX-TM10 (serv.man11) Service Manual online
2
2
2-2
2-2
Technology > Basic Configuration > Functional Configuration
Technology > Basic Configuration > Functional Configuration
Basic Configuration
Functional Configuration
This equipment is mainly consists of a feed block, trimming block, paper delivery block, and
waste paper stack block.
waste paper stack block.
Feed block
[1]
[1]
Receives the booklet stitched by the saddle stitcher, and then delivers it to
the next block.
the next block.
T r i m m i n g
block [2]
block [2]
Trims the fore edge of the stitched booklet.
* When trimming is not done, the booklet just passes through the trimming
block.
* When trimming is not done, the booklet just passes through the trimming
block.
P a p e r
d e l i v e r y
block [3]
d e l i v e r y
block [3]
Applies pressure on the press rollers during transfer, delivery, registration,
and trimming of the stitched booklet.
* When trimming is not done, registration of the booklet is not done either.
and trimming of the stitched booklet.
* When trimming is not done, registration of the booklet is not done either.
Waste paper
stack block
[4]
stack block
[4]
Collects the waste paper generated when fore edges of booklets are
trimmed.
trimmed.
4. Waste paper stack block
1. Feed block
2. Trimming block
3. Paper delivery block
F-2-1
Click on the first or last page to see other MX-TM10 (serv.man11) service manuals if exist.