Read Sharp MX-SP10 Service Manual online
MX-RP13/SP10/CS10 DISASSEMBLY AND ASSEMBLY 5 - 2
E. Reverse clutch, paper exit roller
(1)
Reverse clutch removal
1) Disconnect one connector.
2) Remove the resin E-ring.
3) Remove the reverse clutch.
■ Note for reassembly
Attach the stopper of the reverse clutch along with the rib on the
motor mounting plate.
Attach the stopper of the reverse clutch along with the rib on the
motor mounting plate.
(2)
Paper exit roller removal
1) Remove the E-ring.
2) Slide the bushing.
3) Remove the paper exit roller.
4) Remove the E-ring.
5) Remove the bushing.
F. Drive unit
(1)
Transport unit removal
1) Disconnect four connectors.
2) Remove the harness from the clamp.
3) Remove the snap band.
4) Remove one screw.
5) Remove the earth wire.
6) Remove one screw.
7) Disconnect the RSPF harness.
8) Remove four screws.
9) Remove the transport unit.
■ Note for reassembly
Before assembly, be sure to check that the harness is passed
through the rib.
Before assembly, be sure to check that the harness is passed
through the rib.
Arrange the RSPF harness to the outside of the base tray so that it
is nit pinched before assembly.
is nit pinched before assembly.
1
1
3
2
3
4
1
2
5
1
1
3
6
7
5
4
1
1
2
8
8
8
9
：'11/Mar/14
1
Click on the first or last page to see other MX-SP10 service manuals if exist.