MX-RBX1 (serv.man7). Section 5 - Operational Descriptions . - Sharp Copying Equipment Service Manual (repair manual). Page 4

MX-FNX2/AR-PN1/MX-RBX1  OPERATIONAL DESCRIPTION  5 – 4

The machine performs the following in response to the commands
coming from its host machine on the sheets arriving from the host
machine for delivery: simple stacking, job offset, and stapling or
folding (in two).
If a punch unit (option) is installed, the sheets are pouched and
delivered to the delivery tray.
Sheets may be delivered in either of five ways (including one for
the punch unit):

a. Simple Stacking
The machine pulls in the sheet once to the processing tray and
then delivers it to the delivery tray.

b. Job Offset
The machine pulls the sheet once to the processing tray. It then
moves the sheet to the front or the rear using the aligning plate.
When it has deposited a specific number of sheets, it delivers them
in the form of a aligning plane. When the number of sheets stacked
on the processing tray reaches a specified value, the sheets are
delivered in a form of a stack.

c. Stapling
The machine stacks sheets coming from its host machine on the
processing tray. When the number of sheets stacked on the pro-
cessing tray reaches a specified value, the finisher staples them
delivers the stapled stack to the delivery tray.

Punching

Normal delivery

Delivery method

Middle 2-point stapling

Job offset

Simple stacking

Stapling

Front 1-point stapling

Rear 1-point stapling

Middle 2-point stapling

Stitching

Saddle delivery

Tray

Paper

4th set

(direction of delivery)

Results of offset delivery (4 jobs)

2nd set

3rd set

1st set