Read Sharp MX-RB20 Service Manual online
MX-RB20 MAINTENANCE 3 – 2
2. Each unit disassembly
A. Paper pass unit
1)
Pull out the paper pass unit, and remove the screw. Free the
lock, to remove the paper pass unit.
1. Remove the joint part of the finisher and remove the con-
nector.
2. Remove four screws. PUll out the paper pass unit from the
left side after opening the paper pass front cover.
lock, to remove the paper pass unit.
1. Remove the joint part of the finisher and remove the con-
nector.
2. Remove four screws. PUll out the paper pass unit from the
left side after opening the paper pass front cover.
3. Disassembly and assembly of each
unit
A. Inlet port roller (Drive), inlet port rear roller
(Drive), paper exit front roller (Drive), paper
exit roller (Drive)
exit roller (Drive)
1)
Remove the paper pass unit.
2)
Open the upper guide unit, and clean the inlet port roller
(Drive), inlet port rear roller (Drive), paper exit front roller
(Drive), and the paper exit roller (Drive).
(Drive), inlet port rear roller (Drive), paper exit front roller
(Drive), and the paper exit roller (Drive).
No.
Name
1
Paper pass unit
No.
Name
1
Inlet port roller (Drive)
2
Inlet port rear roller (Drive)
3
Paper exit front roller (Drive)
4
Paper exit roller (Drive)
Click on the first or last page to see other MX-RB20 service manuals if exist.