Read Sharp MX-RB12 (serv.man3) Service Manual online
MX-RB12 MAINTENANCE 5 – 4
4) Remove the Mylar, and check the interface transport unit outlet
port sensor.
C. Motors, fans, and solenoids
1) Remove the interface unit.
2) Remove the front cabinet, and check the interface reverse
2) Remove the front cabinet, and check the interface reverse
path solenoid.
3) Remove the rear cabinet, and check the transport motor 2.
4)
Remove the cover bottom at the back surface, and check the
interface fan and the interface transport motor 1.
interface fan and the interface transport motor 1.
NOTE: When the interface reverse path solenoid is removed, an
adjustment is required when installing it again.
When installing, fit it with the adjustment reference.
Press the solenoid with your hand, and perform the following
adjustment.
adjustment.
No.
Name
1
Interface fan
2
Interface transport motor 1
3
Interface transport motor 2
4
Interface reverse path solenoid
1
1
2
3
2
1
4
1
1
1
1
1
2
1
2
1
1
1
2
Adjustment
reference
d0.5
17r1mm
Click on the first or last page to see other MX-RB12 (serv.man3) service manuals if exist.