Read Sharp MX-RB11 Service Manual online
MX-RB11 MAINTENANCE 3 – 3
3. Disassembly and assembly of each
unit
A. Inlet port roller (Drive), inlet port rear roller
(Drive), paper exit front roller (Drive), paper
exit roller (Drive)
exit roller (Drive)
1)
Remove the paper pass unit.
2)
Open the upper guide unit, and clean the inlet port roller
(Drive), inlet port rear roller (Drive), paper exit front roller
(Drive), and the paper exit roller (Drive).
(Drive), inlet port rear roller (Drive), paper exit front roller
(Drive), and the paper exit roller (Drive).
NOTE: If the interface reverse path solenoid is removed, the
adjustment is required at the installation.
Slide the flapper toward the left side with the solenoid plunger
pushed in, until the position in which width becomes maximum.
Install the interface reverse path solenoid.
pushed in, until the position in which width becomes maximum.
Install the interface reverse path solenoid.
No.
Name
1
Inlet port roller (Drive)
2
Inlet port rear roller (Drive)
3
Paper exit front roller (Drive)
4
Paper exit roller (Drive)
4
1
3
2
Click on the first or last page to see other MX-RB11 service manuals if exist.