MX-PNX1C (serv.man15). COUNTERMEASURE FOR PAPER JAM (POD2_S) AROUND ENTRANCE SECTION OF INNER FINISHER - Sharp Copying Equipment Technical Bulletin (repair manual). Page 2

Read Sharp MX-PNX1C (serv.man15) Technical Bulletin online

 
 
 
2/3 
 
 
- Change of the dimension of Mylar (MX-FNX9/FNX1/PNX1) 
 
 
 
 
- Mylar affixation position (MX-FNX9/FNX1) 
 
 
 
 
 
 
 
 
 
 
 
- Change of hole positions of Bracket Unit (MX-FNX9/FNX1)   
 
 
 
 
 
 
 
 
 
- Identification of current/new Bracket Unit (MX-FNX9/FNX1)     
 
 
 
 
 
 
 
  Move the mounting hole position of 
  Dummy Punch Unit to 1.5mm upper side.
  Move the mounting hole position of 
  Dummy Punch Unit to 1.5mm upper side.
 Before change: 12mm 
  After change: 13.1mm 
 Modified parts: 
  "N" mark is added. 
Dummy Punch Unit
  Protruded amount of Mylar
 Before change: 1.8mm 
  After change: 2.9mm 
  Move the mounting hole position of 
  Dummy Punch Unit to 1.5mm upper side.
Mylar
Page of 3
Display

Click on the first or last page to see other MX-PNX1C (serv.man15) service manuals if exist.

Random: