Read Sharp MX-PEX1 (serv.man8) User Guide / Operation Manual online
I
NSTALLING
P
RINTER
D
RIVERS
10
N
OTE
:
For a description of each print connection, see
Configuration and Setup
.
You must now create a printer port and install the printer driver from the User Software
(Drivers) CD.
(Drivers) CD.
N
OTE
:
You cannot use Point and Print to install the driver and configure the printing
connection to the Fiery X3eTY2 in a single procedure.
4 Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start and choose Printers and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and Faxes.
5 Windows 2000: Double-click Add Printer and click Next.
Windows XP: Double-click Add a printer and click Next.
Windows Server 2003: Choose Add a printer and click Next.
Windows Server 2003: Choose Add a printer and click Next.
6 Click Local Printer and click Next.
7 Click Create a New Port, choose Local Port from the menu, and then click Next.
8 In the Port Name dialog box, type the name of the Fiery X3eTY2, followed by the printing
connection, and then click OK.
Enter the port name as follows:
\\Aero\print
where
Aero
is the name of the Fiery X3eTY2 and
print is the printing connection.
9 In the dialog box displaying lists of manufacturers and printers, click Have Disk.
You will now install the printer driver from the User Software (Drivers) CD.
10 Type the name of the CD-ROM drive and browse to the Prntdrvr\Ps_drvr\Win_2K_XP folder.
11 Make sure “Oemsetup.inf” or “Oemsetup” is selected and click Open.
12 Verify the path is correct in the Install From Disk dialog box and click OK.
13 Follow the on-screen instructions.
Click on the first or last page to see other MX-PEX1 (serv.man8) service manuals if exist.