MX-PEX1 (serv.man8). Fiery PEX1 Windows Printing Guide - Sharp Copying Equipment User Guide / Operation Manual. Page 43

After you install the Fiery X3eTY2 printer driver and configure the proper port, you can print 
directly from most Windows applications. Set the print options for the job and choose Print 
from your application.

To achieve optimal printing results from specific applications, see 

To print from Windows platforms, install the corresponding PostScript printer driver or PCL 
printer driver. For instructions, see 

. The drivers are included on the 

User Software (Drivers) CD and on the Fiery X3eTY2.

Configure the options in the Advanced tab of the printer driver after installation is complete, 
as described on 

.

After you install the printer driver, you can specify print settings for a particular job and print 
it to the Fiery X3eTY2. You can also set default print settings using the driver.

If you print to a virtual printer, you may not be able to set some print options, depending on 
how the virtual printer is configured.

To print from Windows applications on a computer connected to a print server, the print 
server must be a Novell NetWare, Windows 2000/Server 2003, or UNIX server. For more 
information, see 

. 

The following procedures explain how to use the printer driver to specify print options. 
For information about specific print options, see 

.

The following procedures use Windows 2000 illustrations. The interface may vary 

slightly depending on whether you are using the PostScript or PCL driver. Major differences 
are noted.