Read Sharp MX-PEX1 (serv.man7) User Guide / Operation Manual online
C
OMMAND
W
ORK
S
TATION
, W
INDOWS
E
DITION
15
Configuring the connection to the Fiery X3eTY2
The first time you start Command WorkStation, you are prompted to configure the
connection to the Fiery X3eTY2.
connection to the Fiery X3eTY2.
You can also edit the configuration whenever there is any change to your Fiery X3eTY2 server
or network, such as a changed server name or IP address. If you change Fiery X3eTY2 Setup
information, do so before you reconfigure the connection. For information about
reconfiguring the connection, see
or network, such as a changed server name or IP address. If you change Fiery X3eTY2 Setup
information, do so before you reconfigure the connection. For information about
reconfiguring the connection, see
“To modify the configuration for Command WorkStation,
Windows Edition”
on page 17.
B
EFORE
YOU
BEGIN
• Print the Fiery X3eTY2 Configuration page.
For instructions on printing the Configuration page, see
Configuration and Setup
.
This page contains information you need when configuring the connection, such as the IP
address of the Fiery X3eTY2. For TCP/IP installations, you can use the DNS name instead of
the IP address. Make sure the Fiery X3eTY2 is already registered in a Domain Name Server
(DNS) on your network. For more information, contact your network administrator.
address of the Fiery X3eTY2. For TCP/IP installations, you can use the DNS name instead of
the IP address. Make sure the Fiery X3eTY2 is already registered in a Domain Name Server
(DNS) on your network. For more information, contact your network administrator.
T
O
CONFIGURE
THE
CONNECTION
FOR
C
OMMAND
W
ORK
S
TATION
, W
INDOWS
E
DITION
1 Choose Start > Programs > Fiery > Command WorkStation to start the utility.
The Available Servers dialog box appears and displays all servers found in the local subnet.
Click on the first or last page to see other MX-PEX1 (serv.man7) service manuals if exist.