Read Sharp MX-PE12 FIERY Service Manual online
9
Service Guide: Fiery® Server MX-PE12
Introduction
Also, keep in mind that the most common cause of a hardware problem is a faulty or loose connection. Before you
replace an expensive component, check internal and external connections (see
page 20
).
Precautions
This section includes information about how to safely operate and service the MX-PE12 and how to avoid damage to
MX-PE12 components.
Report shipping damage
If there is evidence of shipping damage, save the shipping boxes and damaged parts. Call the shipper immediately to
file a claim and notify your authorized service/support center.
Do not change an existing network
The MX-PE12 is probably connected to an existing Local Area Network (LAN) based on Ethernet hardware. The
network is the link between the customer’s computer, existing laser printers, and other prepress equipment. Never
disturb the LAN by breaking or making a network connection, altering termination, installing or removing networking
hardware or software, or shutting down networked devices without the knowledge and express permission of the site
administrator.
Do not assign an IP address to the MX-PE12
Only the site administrator should assign an IP address to a network device, including the MX-PE12. If you enter an
incorrect IP address for the MX-PE12, errors may occur on connected devices.
Handling boards
When handling a printed circuit board, do not bend it. Hold it by opposing edges, rather than by the corners.
Handling the hard disk drive
To ensure that you do not damage the hard disk drive, do the following:
•
Follow electrostatic discharge (ESD) precautions.
•
Keep magnets and magnetic-sensitive objects away from the hard disk drive.
•
Do not loosen or remove the screws on the top of the hard disk drive. Doing so voids the warranty.
•
Handle the hard disk drive by its sides and avoid touching the printed circuit board.
•
Do not drop, jar, or bump the hard disk drive.
•
Before you remove or install a hard disk drive, allow it to reach room temperature.
Avoid magnets
Keep magnets and magnetic-sensitive objects away from electronic components, especially the hard disk drive.
Click on the first or last page to see other MX-PE12 FIERY service manuals if exist.