Read Sharp MX-PE10 FIERY (serv.man46) Technical Bulletin online
Page 2 of 4
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
Result:
SRA3(320x450) is required in the engine panel.
SRA3(320x450) is required in the engine panel.
3. Error message seen throughout while printing jobs to Booklet maker
Steps to reproduce the Issue
1. Import a multipage job to CWS hold queue (here 12 page).
2. Open JP and select Booklet option under layout and set paper size to Letter SEF.
3. Under Finishing Tab select Output Tray to Booklet Maker output tray.
4. Under Job info tab increase the Copies to 5
5. Print the job and observe CWS Errors and Alerts section.
2. Open JP and select Booklet option under layout and set paper size to Letter SEF.
3. Under Finishing Tab select Output Tray to Booklet Maker output tray.
4. Under Job info tab increase the Copies to 5
5. Print the job and observe CWS Errors and Alerts section.
Results:
CWS Errors and Alerts keeps showing the message "Open the cover of Booklet maker and
remove the remained paper" throughout the print job. Logs and screen capture attached.
remove the remained paper" throughout the print job. Logs and screen capture attached.
4. When User authentication is set, print out by user which has maximum allowed
print count and when it stopped by limitation, an alert is not shown on CWS
[Device settings]
Language : English (US)
Option: Decurler/4k finisher
【Prerequisite】
1. Register 1 user in MFP (Login Name:"10000" / Password:"10000")
2. Enable internal authentication of MFP (User Authentication: ON)
3. Set in maximum allowed print count group list in MFP(Printer: Full color:[Limitation]、[1])
4. Set maximum allowed print count group list registered in procedure 3 to a user registered in
1. Register 1 user in MFP (Login Name:"10000" / Password:"10000")
2. Enable internal authentication of MFP (User Authentication: ON)
3. Set in maximum allowed print count group list in MFP(Printer: Full color:[Limitation]、[1])
4. Set maximum allowed print count group list registered in procedure 3 to a user registered in
procedure 1
6. Fiery server WebTools: Allow user without Authentication: ON
7. Create same user which is registered in MFP to Fiery server (User Name:"10000" /
7. Create same user which is registered in MFP to Fiery server (User Name:"10000" /
Password:"10000")
8. 7. Set a user registered in MFP also for printer driver User authentication (User Name:
"10000" / Password:"10000")
Steps to reproduce the Issue:
1. Open Letter_5P word file
2. In EFI driver <Media>tab, set <Paper Size:> as <Letter LEF>
3. In EFI driver <Media>tab, set <Document Size:> as <Letter LEF>
4. In EFI driver <Jobinfo>tab, disable <User Windows Login>
2. In EFI driver <Media>tab, set <Paper Size:> as <Letter LEF>
3. In EFI driver <Media>tab, set <Document Size:> as <Letter LEF>
4. In EFI driver <Jobinfo>tab, disable <User Windows Login>
Click on the first or last page to see other MX-PE10 FIERY (serv.man46) service manuals if exist.