Read Sharp MX-PE10 FIERY (serv.man44) Technical Bulletin online
8
Installing the 32-bit Fiery Server printer driver on a 64-bit Windows
Server 2008 computer
Server 2008 computer
This procedure assumes that the user has already installed the 64-bit version of the Fiery
Server printer driver successfully on the Windows Server 2008 computer, and needs to add
the 32-bit version for Point and Print purposes. The process requires the user to have access to
a remote 32-bit Windows Server 2008 computer.
Server printer driver successfully on the Windows Server 2008 computer, and needs to add
the 32-bit version for Point and Print purposes. The process requires the user to have access to
a remote 32-bit Windows Server 2008 computer.
T
O
ADD
THE
32-
BIT
PRINTER
DRIVER
TO
A
64-
BIT
W
INDOWS
S
ERVER
2008
COMPUTER
1 Log on as the Administrator to the remote 32-bit Windows Server 2008 computer.
2 Go to the [Windows]\System32 folder on the remote 32-bit Windows Server 2008 computer
and make that folder shared.
3 Get the external IP address of the remote 32-bit Windows Server 2008 computer and record it
somewhere. You are going to need this when installing the additional driver.
4 Log on as the Administrator to the 64-bit Windows Server 2008 computer (your host).
5 Go to Control Panel >Printers and select Server Properties on the host system.
6 Select the Drivers tab.
The driver that you have installed with “x64” under the Processor column should be listed.
7 Click Add.
8 Select the additional driver you want to install, and then click Next.
In this case, it will be “x86 Type 3 - User Mode”.
9 Click Have Disk and point to the “oemsetup.inf” of the Fiery Server printer driver.
10 Select the Fiery Server printer driver and click Next.
11 Click Finish.
12 After step
9
, another screen displays with “Please provide a printer driver”. Once again select
the “oemsetup.inf” that you selected in step
8
.
13 Provide a path to Windows Media (x86 Processor). Click Browse and browse to \\[IP ADDRESS
OF WINDOWS SERVER 2008 32-bit remote computer] and click Enter.
Because you have initially shared the “Windows\System32” folder on this remote computer,
you will have access to the System32 folder.
you will have access to the System32 folder.
14 Go to “system32\driverstore\FileRepository\ntprint.inf_xxxxx” folder, where “xxxxx” can be
any length of any letters and numbers depending on your system. The key here is to select
the folder that starts with “ntprint.inf_”.
the folder that starts with “ntprint.inf_”.
15 Select “ntprint.inf” file and Click OK.
16 Installations should continue and 32-bit version of the Fiery driver will be installed on your
system.
17 You can take the sharing off from “Windows\system32” folder on the remote 32-bit
computer.
Click on the first or last page to see other MX-PE10 FIERY (serv.man44) service manuals if exist.