MX-PE10 FIERY (serv.man44). Customer Release Notes for Fiery Server MX-PE10, Version 1.1 - Sharp Copying Equipment Technical Bulletin (repair manual). Page 5

If Cover page and Transparency Interleave are selected, the cover page prints, but the 
transparency interleaves do not.

You cannot use GBC punch with Tab media.

Before you print a job with a custom paper size, set the size the paper size for the tray on the 
MFP. If you do not, the job does not print.

If you print a booklet from the printer driver and then open and save the job in Impose and 
then print the job again, Impose settings are honored rather than printer driver settings. If the 
settings in the printer driver and Impose do not match, the output will be different.

To avoid this, make sure that Finishing options in the printer driver and Job Properties match.

Staple mode is not supported for glossy, heavy or embossed media types except for cover 
pages. If you attempt to print jobs with staples and any of these media types, the job may be 
cancelled. However, if the job used glossy, heavy, or embossed paper for cover pages and Staple 
is selected, the job is printed and stapled.

The default setting for Sort Mode (see Job Properties > Finishing) is Sort without shift so that 
New Tab in Mixed Media works correctly.

If the Fiery Server enters in sleep mode, it will wake up only when the keyboard is pressed. 
Touching the printer touch panel or touch pad does not wake up the Fiery Server. The setting 
“Put the computer to sleep” is set to Never by default.

The Direct connection is intended for downloading fonts and for use with test applications 
that require back channel information from the Fiery server. If security is a concern, Direct 
connection is not recommended for printing jobs because some jobs sent to the Direct 
connection cause temporary files to be stored on the Fiery server. For full security, use Secure 
Erase instead.

For more information, see Configuration and Setup.