MX-PE10 FIERY (serv.man44). Customer Release Notes for Fiery Server MX-PE10, Version 1.1 - Sharp Copying Equipment Technical Bulletin (repair manual). Page 4

Read Sharp MX-PE10 FIERY (serv.man44) Technical Bulletin online

4
Opening Printer Driver Properties
Depending on your operating system, it takes longer than usual to open printer driver 
Properties. For example:
• On Windows XP Professional Service Pack 3 (32-bit), from Printers and Faxes, it may take 
up to 30 seconds
• On Windows 7 Ultimate Service Pack 1 (64-bit), from Devices and Printers, it may take 
up to 10 seconds
Printing
User Authentication
User Authentication is enabled on MFP. The credentials used for printing must be entered on 
the MFP and match on the Fiery Server side (see Configure > User and Groups). Please note 
that User Authentication works only with the printer driver.
Tray alignment
Tray alignment works only with Plain paper.
Slip sheets and messages about empty paper trays
If Slip Sheet is selected, messages about empty paper trays that display on the Fiery Server and 
the printer touch panel may not match. If this occurs, follow refer to the messages on the 
MFP rather than the Fiery Server.
Slip sheet and Punch
Punch is not supported with Slip sheet.
Slip sheet and Group
System limitation: If Slip Sheet and Group are selected and the number of copies is 18 or 
more, the job is canceled.
Saddle stitch maximum limit
Saddle stitch supports a maximum of 20 sheets to the saddle stitch tray.
If a job exceeds the maximum limit, after printing 20 sheets, an error message displays in 
Command WorkStation and prompts you to see the printer touch panel. The MFP ejects 20 
sheets with staple to the Saddle stitch tray.
On the printer touch panel, a message displays asking you whether you want to continue 
stapling. If you press Continue, the MFP prints the rest of the sheets to the finisher’s upper 
tray. If you press Cancel, job is cancelled by the MFP.
Page of 9
Display

Click on the first or last page to see other MX-PE10 FIERY (serv.man44) service manuals if exist.