MX-PE10 FIERY (serv.man20). RELEASE OF SERVICE PACK (SP) FOR GM1.1 OF EFI PRINT SERVER(MX-PE10) - Sharp Copying Equipment Technical Bulletin (repair manual). Page 5

Page 4 of 5 

EFI Fiery

™

  

EXE patch release note 

 

 

Disclaimer 
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is not user-
accessible, and are designed to have only one or more of the following cryptographic functionality(ies): 
1  Functionality to execute copy-protected programs 
2  Functionality to access to digital contents stored on copy-protected read-only media 
3 

  Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content 

4  Functionality for copying control of copyright protected audio/video data 
5  Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated circuits 
© Copyright 2014 | ELECTRONICS FOR IMAGING INC 

 

 

 

1.  Known issues listed below, read before installing MX_PE_10_SP1.exe

 

patch: 

  None. 

2.  The following prerequisite(s) must be installed in the order specified before applying the 

MX_PE_10_SP1.exe patch: 
  FIT100892788 

3.  Do NOT install any of the following patch(es) after installing the MX_PE_10_SP1.exe patch. If you 

must install any of the patch(es) below, do so before installing the MX_PE_10_SP1.exe patch: 
  FIT100935486 
  FIT101012786 
  FIT101086640 
  FIT101117936 
  FIT101162398 
  FIT101095936 
  FIT101261100 
  FIT101315812 
  FIT101608652 

4.  This patch, MX_PE_10_SP1.exe is exclusive, it must be installed by itself, and the server must be 

rebooted once.  After that, other patches can be applied to the server. 

 

1.  Make sure that the Fiery printer controller reaches Idle. 

2.  Execute MX_PE_10_SP1.exe and follow the instructions in the Fiery Patch Downloader. 

3.  Notes about the Fiery Patch Downloader 

a.  Logon must be admin.  This is fixed and cannot be modified. 

b.  Password is the Fiery administrator login password. 

c.  Hostname can be the IP address or the Fiery server name.  

4.  After the patch is downloaded, and when prompted by the Fiery Patch Downloader, choose 

Reboot. (If you choose to Restart later, make sure you manually reboot the server for the 
changes to take effect) 

5.  Wait until the Fiery controller reaches Idle and print the Configuration page.  

6.  Verify that the System Updates Log section contains the patch number SP1_ FIT101660804.