MX-MF11 (serv.man3). MX-MF11 Installation Manual - Sharp Copying Equipment Service Manual (repair manual)

Model: MX-MF11 (serv.man3)
Pages: 3 Few pages! See other manuals at the bottom of the first or last page.
Size: 1.22 MB
Type: PDF
Document: Service Manual
Brand: Sharp
Device: Copying Equipment / MX-MF11 Installation Manual
File: mx-mf11-sm3.pdf
Date: 2018-11-20

Next: Sharp MX-MF11 (serv.man4) Parts Guide

Read Sharp MX-MF11 (serv.man3) Service Manual online

MX-7040N  MX-MF11 (MULTI BYPASS TRAY)  9 – 1
MX-7040N
Service Manual
 
[9] MX-MF11 (MULTI BYPASS TRAY)
1.  Unpacking
A. Packed items check
2.  Installation

NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Removal of the covers

NOTE: When removing the cabinet, insert a screwdriver (-) into the
circled sections in the figure below and remove.
1)
Remove the multi bypass tray paper transportation cover.
2)
Remove the multi bypass tray covers.
B. Installation of the multi bypass tray for LCT
1)
Fasten the connection pins.
No.
Name
Quantity
1
Tab sheet restraint plate
1
2
Rear edge restraint plate
1
3
Bracket
1
4
Connection pin
2
5
Screws
3

MX-7040N  MX-MF11 (MULTI BYPASS TRAY)  9 – 2
2)
Fix the bracket with the screw.
3)
Remove the multi bypass tray from the package.

NOTE: Use man power of two persons to lift the multi bypass
tray. (Refer to the figure below.)
C. Removal of the upper cabinet of the multi 
bypass tray for LCT
1)
Remove the screws and remove the upper cabinet.
MEMO: Remove the paper feed section with shifting it to the
direction of the arrow.
2)
Mount the multi bypass tray on LCT and fix it with screws.

NOTE: Insert the connection pin to the positioning hole of the
multi bypass tray.
3)
Connect the harnesses to LCT.
MEMO: Wire the harnesses through the cable clamp.
Screw hole
Screw hole
Connection pin
Connection pin

MX-7040N  MX-MF11 (MULTI BYPASS TRAY)  9 – 3
4)
Fix the upper cabinet with the screws.
MEMO: After fixing the cabinet, shift the paper feed section to
the direction of the arrow.
5)
Open the front door of the LCT, and store the tab sheet
restraint plate to the place as shown in the figure below.

Display

Download Sharp MX-MF11 (serv.man3) Service Manual (Repair Manual)

Here you can read online and download Sharp MX-MF11 (serv.man3) Service Manual in PDF. MX-MF11 (serv.man3) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp MX-MF11 (serv.man3) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

MX-MF11 (serv.man3) Service Manuals

Download	Pages	Size
MX-MF11 (serv.man2) Updated March 2013 Service Manual	127	43.31 MB
MX-MF11 (serv.man5) Service Manual Service Manual	16	1.48 MB
MX-MF11 (serv.man4) July 2012 Parts Guide	20	1.65 MB
MX-MF11 (serv.man6) Parts Guide Parts Guide	20	1.92 MB
MX-MF11 All Sections Specification	16	1.48 MB

Random: