Read Sharp MX-M950 / MX-MM1100 (serv.man83) Technical Bulletin online
Sharp Electronics (UK) Ltd., Technical Services Group
[Description] ROM UPGRADE ..... (10).
No
.
Subject Description
1
MIB information
related
Of counter information displayed in the MFP main body, items that do
not exist in MIB information have been added to MIB information.
not exist in MIB information have been added to MIB information.
2
Software switch-
related
related
With the MX-PEX3 (Fiery controller), by transmitting bi-directionally,
the automatic recognition would recognize the MXPNX3A (2/3 hole
punch unit) as "2 hole". To bypass this, bi-directional communication
check has been removed, controller software SW has been added for
manual selection of 2/3 hole punch. The SW software, switches and
optional configuration in the Fiery controller.
- Controller software switch (Sim55-3) SW No.: 11 DATA: 6
the automatic recognition would recognize the MXPNX3A (2/3 hole
punch unit) as "2 hole". To bypass this, bi-directional communication
check has been removed, controller software SW has been added for
manual selection of 2/3 hole punch. The SW software, switches and
optional configuration in the Fiery controller.
- Controller software switch (Sim55-3) SW No.: 11 DATA: 6
0: Do not warn (default)
1: Warn
1: Warn
3
Authentication
related
related
Due to a setting change of webpage, even if the SNMP v3 setting was
disabled, the authentication key and privacy key input would be
prompted. This glitch has been corrected.
disabled, the authentication key and privacy key input would be
prompted. This glitch has been corrected.
4 Printer-related
If invalid data is added after the EOI marker of JPEG data in printing
of a file such as a PowerPoint file including JEPG data, printing cannot
be performed because a PCL-XL error occurs. A change has been made
so that data after the EOI marker is ignored and printing is performed.
of a file such as a PowerPoint file including JEPG data, printing cannot
be performed because a PCL-XL error occurs. A change has been made
so that data after the EOI marker is ignored and printing is performed.
5 Printer-related
If both sides of an odd page document are printed when MX-PEX3
(Fiery controller) is used, the count may be made by one page extra.
This glitch has been corrected.
(Fiery controller) is used, the count may be made by one page extra.
This glitch has been corrected.
6 Printer-related
If excel data, including specific AutoShape data, is printed with the
printing quality on the application side set to "300dpi", the AutoShape
image may not be printed correctly. This glitch has been corrected.
printing quality on the application side set to "300dpi", the AutoShape
image may not be printed correctly. This glitch has been corrected.
7 Printer-related
When printing from the WEB page of the MFP and “Network Settings
> Printer Port Settings > LPD Settings > Banner Use” is enabled,
printing would hang-up around 1,000 jobs. This glitch has been
corrected.
> Printer Port Settings > LPD Settings > Banner Use” is enabled,
printing would hang-up around 1,000 jobs. This glitch has been
corrected.
8
Support for new
standards of the
standards of the
International
Energy Star
program
The criteria change of the International Energy Star program involves
the following changes of the factory default values for the function of
preheating and auto power shutoff:
the following changes of the factory default values for the function of
preheating and auto power shutoff:
Model
Name
Destinati
on
Before change
After change
Preheati
ng
Auto
power
shutoff
Preheati
ng
Auto
power
shutoff
MX-M850
North
America
Europe
Europe
Australia
China
15 min.
90 min.
5 min.
25 min.
Notes:
Updating to this version dose not involve any change of the setting value
for the MFP printer.
The time required for the function of preheating and auto power
shutoff to be active will be reset to the factory default value as
described above; when a system administrator performs the operation
of saving and/or calling system settings and then resets to the factory
default value, or when destination change (Sim26-6) is implemented.
9
Main body
control-related
When acquired or updated, the delivery tray state may rarely change
to top tray output to the offset tray. This glitch has been corrected.
to top tray output to the offset tray. This glitch has been corrected.
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man83) service manuals if exist.