Read Sharp MX-M950 / MX-MM1100 (serv.man49) User Guide / Operation Manual online
- 10 -
REQUIREMENT
Creating a Booklet
MODE
Print
FINISHER
Plockmatic (MX-BMX1)
TYPE
With Printed Cover
Plockmatic is docked
Booklet Maker Mode is
in System Settings
If not, please follow instructions on page 35.
•
Check / Set Plockmatic Settings
Size
Auto
Staple
On
Trim
4.5mm or preference
Cover
Off
Will only show in display if attached
SQF
Auto
Will only show in display if attached
•
At PC using MX-M850/950/1100 PCL or PS Driver
Main Tab
→
→
→
→
Check Pamphlet Style in Document Style box
In drop down box select Tiled Pamphlet for A3 or 2-Up for A4 booklets
In drop down box select Tiled Pamphlet for A3 or 2-Up for A4 booklets
→
→
→
→
Select Finishing
In Staple drop down box select 2 Staples
In Staple drop down box select 2 Staples
→
→
→
→
Select # to be printed from drop down box under Copies
NB. Plockmatic will not be visible on the
MX-M850/950/1100 icon in the Driver
(FNX8 will still be visible). The output tray
of FNX8 will turn green after 2 staples (in the
Finishing box) is selected. This indicates that
the document will be sent to the Plockmatic.
MX-M850/950/1100 icon in the Driver
(FNX8 will still be visible). The output tray
of FNX8 will turn green after 2 staples (in the
Finishing box) is selected. This indicates that
the document will be sent to the Plockmatic.
Special Modes Tab
→
→
→
→
Check Different Paper in Special Option box
Select Settings
Select Settings
Different Paper screen
→
→
→
→
Check Cover Page in Insert Position box
→
→
→
→
Select paper tray placed
→
→
→
→
Select 1 or 2 sided in Finishing Method box
→
→
→
→
Select Add
→
→
→
→
Select OK
→
→
→
→
Save settings
→
→
→
→
OK x 3
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man49) service manuals if exist.