Read Sharp MX-M950 / MX-MM1100 (serv.man40) Service Manual online
MX-M1100 MAINTENANCE 9 – 14
* When shifting the position, fix the cam (a) in the reversed
direction.
29) Remove the blue screw (a), and slide the cover (b) to remove.
30) Disconnect the connector (a), extend the pawl (c), and remove
the discharge lamp.
Clean the discharge lamp (b) at every 500K.
* Be careful not to break the pawl. (c).
Clean the discharge lamp (b) at every 500K.
* Be careful not to break the pawl. (c).
31) Remove the blue screw (a), and remove the cover (b).
32) While pushing the push button (a), remove the screen grid (b)
from the rear side and replace it.
* Be careful not to touch the mesh section of the screen grid.
* When installing the screen grid, face the marking (a) toward
* When installing the screen grid, face the marking (a) toward
the front, and hang the front side (b) first, then hang the rear
side (d) while pushing the push button (c).
side (d) while pushing the push button (c).
a
a
a
b
a
b
c
b
a
b
a
b
c
d
b
a
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man40) service manuals if exist.