Read Sharp MX-M950 / MX-MM1100 (serv.man29) Service Manual online
MX-M1100 FAN, FILTER SECTION R – 4
(4) Machine exhaust fan 1
1)
Remove the rear cabinet.
2)
Remove the exhaust filter (a). Disconnect the connector (b),
and remove the screw (c). Remove the machine exhaust fan 1
(d).
* When installing, be careful to arrange so that the direction of
and remove the screw (c). Remove the machine exhaust fan 1
(d).
* When installing, be careful to arrange so that the direction of
the arrow mark (e) on the side of the duct and the arrow
mark (f) on the side of the fan are same.
mark (f) on the side of the fan are same.
* Check to confirm that the bent section of the duct is engaged
with the notch of the fan.
(5) Ozone exhaust fan 1 / Ozone exhaust fan 2
1)
Remove the rear cabinet and the right cabinet rear upper.
2)
Remove the screw (a), and open the control box (b).
3)
Disconnect the connector (a). Open the wire saddle (b), and
remove the snap band (c).
remove the snap band (c).
4)
Remove the screw (a), and remove the ozone duct unit (b).
5)
Disconnect the connector (a). Remove the screw (b), and
remove the high voltage MAIN PWB (c) and the high voltage
SUB PWB (d).
remove the high voltage MAIN PWB (c) and the high voltage
SUB PWB (d).
6)
Remove the screw (a), and remove the cover (b).
a
d
c
c
b
f
e
a
a
b
a
a
a
a
a
a
a
a
b
b
c
c
c
c
c
c
c
a
a
b
a
b
b
b
c
d
b
a
a
a
a
b
Click on the first or last page to see other MX-M950 / MX-MM1100 (serv.man29) service manuals if exist.