MX-M904, MX-M1204 (serv.man2). Handy Guide Updated - Sharp Copying Equipment Handy Guide. Page 16

Read Sharp MX-M904 / MX-M1204 (serv.man2) Handy Guide online

INITIAL SETUP 
SHARP  
 
16
 
UNPACKING & LOCK REMOVAL: 
 
Use Skid Slopes [UKOG-0367FCZZ] to remove device from shipping pallet. 
 
Operation Panel installation. 
 
Remove Tray Lift Lock Plates. 
 
Release Fusing Pressure. 
 
DEVELOPER SETUP:
 
 
Sim 25-02   Auto Developer Adjustment - Select K. 
 
 
Toner Installation must be performed after Auto Developer Adjustment is 
 
 
completed.
   
 
 
 
For optimum image quality and performance, it is recommended to setup 
 
 
and install Developer at the customer site (environment). 
TONER INSTALLATION & REPLENISHMENT:
 
 
Install Toner Cartridge [K]: 
 
 
Caution: 
 
 
DO NOT open any Exterior Cover, Power OFF/ON or enter Simulation  
 
 
Mode during Initial Toner Replenishment.
 
PRODUCT ACTIVATION & FIRMWARE UPGRADE: 
 
Activation of Optional Products: 
 
 
System Settings – Product Key.
 
 
Sim 22-05   Check Firmware Version(s): 
Upgrade to latest version.
 
INITIAL SETUP:
 
 
Sim 21-01 
Maintenance Cycle Setting: 
Set PM Counter = 500k,
 
 
Sim 26-02 
LCC Installation (Paper Size): 
A4/Letter.
 
 
Sim 26-06 
Machine Destination check. 
 
Sim 26-35 
Set Multi Error Counter: 
Set to 1 (Multi Count).
 
 
Sim 26-52 
Non Printed Paper Counter Set-up. 
 
Sim 40-12 
Multi Purpose Tray (Tray 4) Adjustment/Calibration. 
 
Sim 55-03 
Process Mixed Size Pages (orientation) when Printing in Duplex: 
 
 
SSW 3-6, 0 = Disable, 1 = Enable.
 
 
Adjust Date/Time (Inc. Daylight Saving setting):  
 
 
System Settings – Clock Adjust.
 
 
Keyboard Language Setting
 
 
System Settings – Default Settings – Keyboard Select: Set English(US).
 
 
Paper Size & Type Settings:  
 
 
System Settings – Paper Tray Settings. 
 
 
Set cassette size by adjusting the guides in the cassette.
 
 
 
Page of 82
Display

Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man2) service manuals if exist.